About Adil Liaqat Ali

Education

Experience

  • 2013 - 2021
    Albario Engineering Private Limited

    Assistant Engineer

    Joined Albario Engineering Private Limited in February 2013 as Trainee Engineer for Halmore Power Plant (G.E. O&M Team). In August 2014 promoted to Assistant Engineer. For more than two years I have worked in Operations Department and later transferred to Performance department as Assistant Engineer. Having a sound experience of operation and control philosophy of GE Frame 6FA Gas Turbine, GE-Nuovo Pignone SC 2-26 Steam Turbine, HRSG (Descon boiler) and plant auxiliaries. • Having sound experience of safe start up, shutdown of Gas turbines and Steam Turbine. • Implementation of Safe Working Procedures & Emergency Response Procedures to ensure the safety of both equipment & plant personnel. • Look after and Control the Operation of Gas Turbine, Heat Recovery Steam Generator, Steam Turbine, Water Treatment Plant and Cooling Tower. • To study and give presentations on operation of different systems of Combined Cycle Power Plant. • Preliminary investigation & trouble shooting of various operational issues. • Compliance with the rules and regulations of General Electric

  • 2016 - 2017
    General Electric (GE)

    Team Lead Operations

    Team Lead Operations (Shift Engineer) at Halmore 225 MW Dual Fuel Combined cycle power plant. I have also worked as Performance Engineer for one year in the same plant. Main responsibilities include: • To ensure the smooth operation of plant as per standard operating procedures under all scenarios like plant startup, shutdown & normal operation. • Management of Shift activities, plant shift personnel, to lead and facilitate the operations team. • To ensure and implement Permit System for safety of equipment, person and the environment. • To check and manage the NPCC and External Bodies correspondence. • Managing and reporting of operations data on daily, weekly and monthly basis. • Monitoring and reporting of Plant Key Performance Indicators (KPIs). • Report the plant availability, startup reliability and trips in ORAP software. • Conducting performance test of complex, prepare analytical reports on performance of GTs, ST, cooling tower system and compare its performance as per the defined correction curves. • Monitoring of the plant efficiency parameters and taking necessary actions if there, for any abnormality. • To make analytical reports on complex startup. • Monitoring of the fuel parameters and report it to Operations Manager. • Coordinate with maintenance section for improvement and optimization of Plant Performance. • Monitoring/Analyzing daily generation & performance reports.

  • 2017 - 2019
    TNB Remaco

    Shift Charge Engineer

    Shift Charge Engineer at “Balloki 1223 MW Combined Cycle Power Plant Pakistan”. Plant consists of 2 state of the art, heavy duty 9HA Gas Turbines (2x406MW) with triple pressure HRSGs and 1 Alstom Steam Turbine (411MW). Main responsibilities include: • To ensure the smooth operation of plant as per standard operating procedures under all scenarios like plant startup, shutdown & normal operation. • Management of Shift activities, plant shift personnel, to lead and facilitate the operations team. • To ensure and implement Permit System for safety of equipment, person and the environment. • To check and manage the NPCC and External Bodies correspondence. • Monitoring and reporting of Plant Key Performance Indicators (KPIs). • To make analytical reports on complex startup. • Coordinate with maintenance section for improvement and optimization of Plant Performance. • To create punch lists for different systems. • To draft SOPs and guidelines for Plant operation and routines.

  • 2019 - Present
    Engie (Fadhili Operation and Maintenance Companu)

    Shift Charge Engineer

    Shift Charge Engineer at “Fadhili Combined Heat and Power Plant” located in Fadhili, near Jubail, Kingdom of Saudi Arabia. Plant consists of 5x Siemens heavy duty SGT6-5000F Gas Turbines (5x245.9MW) with triple pressure HRSGs, 2 Skoda DST-S10 Steam Turbines (2x176 MW) with extraction, one Gas Fired Boiler as reserve (311 tons) with SPPA T3000 DCS System. Plant design capacity is 1549.4 MW (Gross) along with 1447 t/h Steam and 768.8t/h Feed Water export to Fadhili Gas Plant. Plant is designed to operate on two Gas Fuels, Normal and Low BTU Gas Fuels. Main responsibilities include: • To ensure smooth operation of plant as per standard operating procedures under all scenarios like plant startup, shutdown & normal operation. • Ensure Plant Power Generation/Steam/Feedwater export is withing dispatch instructions and as per contracted parameters. Maintain 100% steam/water export reliability. • Management of shift activities, plant shift personnel, to lead and facilitate operation team. • To ensure and implement Safety Rules (Permit System) for safety of person, equipment and environment. • Monitoring and reporting of Plant Key Performance Indicators (KPI) • Coordinate with maintenance section for improvement and optimization of Plant Operation. • To create punch lists for different systems. • To draft SOPs and guidelines for Plant operation and routines.

Leave Your Review

  • Overall Rating 1.0